Four products. Zero leaks.
Waterproofing made with German polymers. Here are the full specifications, coverage, technical data and datasheets for every Mr. Fixx product.
- Made with German Polymers
- Make in India
- IGBC Member
- ISO 9001:2015
Two-component · 15 Kg
Bath Fix
Acrylic Co-polymer Waterproofing
MRP ₹5,350 incl. taxes
Two-component · 15 Kg
Super Fix Coat
High-Performance Two-Component Crack-Bridging Waterproof Coating
MRP ₹5,350 incl. taxes
Liquid composition · 17 Kg
Hi Bond Latex
High-Performance SBR-Based Bonding Agent & Cement Modifier
MRP ₹5,350 incl. taxes
Single component · 17 Kg
Fixxy Coat
High-Performance UV Resistant Acrylic Waterproof Coating
MRP ₹6,250 incl. taxesWhich one do I need?
| Compare | Bath Fix | Super Fix Coat | Hi Bond Latex | Fixxy Coat |
|---|---|---|---|---|
| Type | Two-component | Two-component | Liquid composition | Single component |
| Pack size | 15 Kg | 15 Kg | 17 Kg | 17 Kg |
| MRP (incl. taxes) | ₹5,350 | ₹5,350 | ₹5,350 | ₹6,250 |
| Best for | Bathrooms, sunken slabs, balconies | Basements, tanks, pools, industrial | Repairs, plaster, bonding coats | Exposed roofs, terraces, exterior walls |
| Elongation | ~80% | >120% | — | >100% at 1 mm thickness |
| Crack bridging | Up to 1.2 mm | Excellent (>1 mm dynamic cracks) | — | Upto 1.5 mm |
| Water resistance | ≥ 1.5 Bar | Upto 7 bar (+ve pressure) | Upto 3 Bar Pressure | — |
| Coverage | Approx. 1.2 kg/m²/mm thickness coat (minimum 2 coats required). | 2.0–2.5 kg/m² for 2 coats at 1 mm DFT. | Waterproofing: ~20–25 sq. ft./ltr/2 coats. | 1 kg = approx. 2 m² (2 coats) @ 200 microns DFT. |
| Shelf life | 12 months from date of manufacturing. | 24 months (sealed condition) | 24 months from date of manufacturing. | 24 months in original sealed container. |
Bath Fix
Acrylic Co-polymer Waterproofing
Bath Fix is a high-performance two-component waterproofing coating designed for extreme wet zones such as bathrooms, toilets, balconies, and terraces. It combines a specially formulated polymer dispersion (Part A) with high-grade cementitious powder (Part B) to form a tough, elastic, and seamless membrane that defends against water, cracks, and weathering.
Special features & advantages
- ✓Super Stretch Power
With elongation up to 80%, BATH FIX expands with your surface to prevent cracking and leaking.
- ✓Seamless & Joint-Free Shield
Forms a continuous waterproofing skin — no joints, no chance for water to sneak through.
- ✓Bonding That Lasts
Strong adhesion to old and new concrete — locks in protection even under tile beds.
- ✓Brush-On Ease, Worker Friendly
Just mix and apply — no complicated tools, no contractor complaints.
- ✓Ideal for Bathrooms & Wet Zones
Custom-made for wet, tricky areas like toilets, sunken slabs & showers.
- ✓Eco-Safe & Non-Toxic
Zero VOC — safe for applicators and homeowners.
- ✓Crack-Bridging Beast
Bridges cracks up to 1.2 mm with ease, reducing leak paths.
Applications
- Toilets & BathroomsOn slab, walls, behind tiles — total zone protection.
- Sunken Slabs & Wet ShaftsEnsures peace of mind in under-tile and under-plaster applications.
- Balconies & ChajjasWithstands water, sun, and temperature changes.
- Terraces & Mild Traffic ZonesDurable under foot traffic & rain.
- Water Tanks, Pools, & DrainsFor internal water retaining surfaces.
- Basements & Concrete WallsWorks against rising damp and lateral water ingress.
Coverage
- Approx. 1.2 kg/m²/mm thickness coat (minimum 2 coats required).
- Typical usage: 2 – 2.5 kg/m² for 2 coats.
Packing
- 15 kg Set (Part A – 5 kg | Part B – 10 kg)
Technical properties
| Testing parameter | Result |
|---|---|
| Appearance | Part A: Milky White / Part B: Grey Powder |
| Mixing Ratio (A:B by weight) | 1 : 2 |
| Mixing Time | 2–3 minutes using a drill (350–400 RPM) |
| Pot Life @ 27°C | Approx. 1 Hour |
| Re-coat Interval | 6–8 hours @ 30°C |
| Full Cure | 7 Days |
| Foot Traffic | After 48 Hours |
| Crack Bridging | Up to 1.2 mm |
| Elongation (28 days @ 30°C) | ~80% |
| Tensile Strength (28 days @ 30°C) | 1.0 – 1.2 N/mm² |
| Water Penetration Resistance | ≥ 1.5 Bar |
| VOC Content | < 0.5 gm/litre |
| Shore A Hardness | Approx. 90 |
| Application Temp. Range | +5°C to +42°C |
| Service Temperature | -10°C to +45°C |
Storage
Cool, dry place; protect from frost & heat.
Shelf life
12 months from date of manufacturing.
Health & safety
- Wear gloves, goggles, and protective clothing
- Avoid inhalation and skin contact
- In case of eye contact, rinse immediately with clean water
- Keep out of reach of children
- Refer to MSDS for detailed safety guidance
Super Fix Coat
High-Performance Two-Component Crack-Bridging Waterproof Coating
Super Fixx Coat is an elastomeric, two-component, cementitious acrylic polymer-based waterproof coating designed to fight water under even the harshest conditions. Engineered for extreme pressure, high flexibility, and aggressive environments, this product bridges cracks, resists water up to 7 bar pressure, and protects against chemical, UV, and chloride attack.
Special features & advantages
- ✓7-Bar Water Pressure Resistance
Capable of withstanding pressurized water zones – even underground!
- ✓Highly Flexible Membrane
Bridges existing and future cracks with elongation >80%.
- ✓Self-Priming on Wet Surfaces
Bonds effortlessly – even in SSD damp conditions.
- ✓Rainproof in 3–5 Hours
Fast-cure technology = less downtime, faster project delivery.
- ✓Concrete Armor
Shields concrete from acid gases, CO₂, chloride attack, and carbonation.
- ✓Zero VOC & Potable Water Safe
Safe for environment, humans, and water tanks.
- ✓UV & Freeze-Thaw Resistant
Built to handle sun, snow, or sludge — no matter the weather.
Applications
- Toilets, Bathrooms & Wet Rooms
- Terraces, Podiums & Balconies
- Underground Basements & Precast Garages
- Swimming Pools, Water Tanks, Water Bodies
- Concrete Roofs & Ducts
- Industrial PlantsResistant to acids, salts, chloride.
- Masonry Walls under Pressure Water Conditions
- Crack-bridging base coatUnder tiles / plaster.
Coverage
- 2.0–2.5 kg/m² for 2 coats at 1 mm DFT.
- Actual coverage depends on surface roughness & site conditions.
Packing
- 15 kg (Composite Pack – Powder + Liquid)
Technical properties
| Testing parameter | Result |
|---|---|
| Appearance | Part A: Milky White, Part B: Grey Powder |
| Mixing Ratio (A:B by weight) | 10 kg Powder : 5 kg Liquid (Approx. 2:1) |
| Mixing Time | 2–3 minutes (slow-speed mixer) |
| Pot Life @ 27°C | ~30 minutes |
| Application Temp. | +5°C to +30°C |
| Service Temp. | 0°C to +50°C |
| Crack Bridging | Excellent (>1 mm dynamic cracks) |
| Shore A Hardness | Approx. 70 |
| Tensile Strength (28 days @ 23°C) | >0.5 N/mm² |
| Elongation @ 28 Days (Grey) | >120% |
| Water Pressure Resistance | Upto 7 bar (+ve pressure) |
| Vapor Diffusion Resistance | Approx. 1000 µ |
| VOC | Zero |
Storage
Store in dry, cool place away from heat & moisture.
Shelf life
24 months (sealed condition) | Consume opened packs immediately.
Health & safety
- Wear gloves, goggles, and protective clothing
- Avoid inhalation and skin contact
- In case of eye contact, rinse immediately with clean water
- Keep out of reach of children
- Refer to MSDS for detailed safety guidance
Hi Bond Latex
High-Performance SBR-Based Bonding Agent & Cement Modifier
Hi Bond Latex is a high-performance, single-component liquid based on SBR (Styrene Butadiene Rubber) polymer. It is engineered to enhance adhesion, flexural strength, waterproofing, and durability of cementitious systems. It acts as a multi-purpose bonding agent, cement modifier, and waterproofing admixture suitable for concrete repairs, overlays, waterproof plaster, and protective coatings.
Special features & advantages
- ✓Old-to-new adhesion
Improves adhesion between old and new concrete.
- ✓Impermeability
Enhances waterproofing and impermeability.
- ✓Stronger mortar
Increases flexural and compressive strength.
- ✓Less cracking
Reduces cracking due to shrinkage or drying.
- ✓Better finish
Improves workability and finish of cement mortar.
- ✓Tile & masonry bond
Provides excellent bonding with tiles and masonry.
- ✓Tough
Resistant to UV, moisture, and chemical exposure.
- ✓Shock resistant
Suitable for heavy-duty bonding.
- ✓Sag resistant
Ideal for vertical applications.
- ✓Versatile
Suitable for internal and external applications.
Applications
- Concrete repairRepairing spalled and damaged concrete surfaces.
- Cement modifierFor plaster, mortar, tile adhesive, screeds.
- Bond coatBetween old and new concrete.
- Wet-area waterproofingCementitious waterproof coatings in bathrooms, toilets, balconies.
- Adhesive baseFor tiles, bricks, marble, and stones.
- PrimerFor cement terrazzo, gypsum board, RCC slabs.
Coverage
- Waterproofing: ~20–25 sq. ft./ltr/2 coats.
- Varies with surface roughness and porosity.
Packing
- Available in 17 Kg
Technical properties
| Testing parameter | Result |
|---|---|
| Appearance | White Milky Liquid |
| Solid Content | ≥ 32% |
| Pot Life | 45–60 minutes |
| Specific Gravity @ 27°C | 1.02 ± 0.02 gm/ml |
| Water Resistance | Upto 3 Bar Pressure |
| pH @ 27°C | 7 ± 1 |
| Bonding Strength | ≥ 4 N/mm² |
| Tensile Strength | ≥ 3 N/mm² |
| Mixing Ratio (SBR : Water : Cement) | 1 : 4 : 7 |
Storage
Store in cool, dry conditions away from sunlight and frost.
Shelf life
24 months from date of manufacturing.
Health & safety
- Wear gloves, goggles, and protective clothing
- Avoid inhalation and skin contact
- In case of eye contact, rinse immediately with clean water
- Keep out of reach of children
- Refer to MSDS for detailed safety guidance
Fixxy Coat
High-Performance UV Resistant Acrylic Waterproof Coating
Fixxy Coat is a high-performance, water-based, acrylic waterproofing coating designed for interior and exterior RCC and masonry surfaces. It is UV resistant, breathable, and forms a flexible, seamless film upon curing. Ideal for terrace, roof slabs, parapet walls, and other critical exposure zones.
Special features & advantages
- ✓Seamless & Elastic
Forms continuous membrane without joints.
- ✓UV Stable
Suitable for exposed external surfaces.
- ✓Easy Application
Single component, brush / roller / spray applied.
- ✓Highly Flexible
Prevents cracking due to thermal movement.
- ✓Breathable
Allows trapped moisture to escape.
- ✓Water washable when wet
No harsh chemicals needed.
- ✓Spot repairable
Easy touch-up maintenance.
- ✓Good adhesion
To concrete, plaster, and masonry.
Applications
- RCC roofs, chajjas, parapets & exterior walls
- Asbestos cement sheetsWith scrim tape support.
- Damp proof course (DPC)Beneath brickwork.
- Bathrooms, balconies & light foot traffic terraces
Coverage
- 1 kg = approx. 2 m² (2 coats) @ 200 microns DFT.
- Coverage may vary with substrate condition and method of application.
Packing
- Available in 17 Kg
Technical properties
| Testing parameter | Result |
|---|---|
| Nature | Single Component |
| Base | Acrylic Emulsion (White Paint) |
| Solid Content | 65% |
| Specific Gravity @ 27°C | 1.35 ± 0.02 gm/ml |
| Surface Dry Time (@27°C) | 30 Minutes |
| Full Cure Time | 7 Days |
| Elongation (28 days @ 30°C) | >100% at 1 mm thickness |
| Crack Bridging Ability | Upto 1.5 mm |
| Pull-out Bond Strength | >0.7 N/mm² (28 days @ 30°C) |
| Tensile Strength (28 days) | >0.7 N/mm² |
Storage
Cool, dry area away from direct sunlight or frost.
Shelf life
24 months in original sealed container.
Health & safety
- Wear gloves, goggles, and protective clothing
- Avoid inhalation and skin contact
- In case of eye contact, rinse immediately with clean water
- Keep out of reach of children
- Refer to MSDS for detailed safety guidance